What's needed:
USB data cable
MediaTek USB VCOM drivers
SP Flash Tool ( Latest version MTK Flash Tool v. 5.1343.01 (18.10.2013))
volcanoboxupdate.blogspot.com
First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
volcanoboxupdate.blogspot.com
Flashing the whole ROM
First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
(MT6575_Android_scatter_emmc.txt or MT6577_Android_scatter_emmc.txt, depending on which phone you have) for your device and ignore any message that may appear.
volcanoboxupdate.blogspot.com
Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear.
volcanoboxupdate.blogspot.com
After the red progress bar is complete, there will appear a purple progress bar.
volcanoboxupdate.blogspot.com
Right after the purple progress bar is complete, a message will appear underneath it:
“Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
When the yellow bar is complete, you'll get a popup with a green circle and Download OK message,
which means that the process has been successfully terminated.
volcanoboxupdate.blogspot.com
You can now safely disconnect your phone and turn it on. The process ends here.
Flashing only part of the ROM
In case you want to flash just one part of the ROM, that is also possible. In the shown example, only recovery image will be flashed.
Deselect all parts except the one(s) you want to flash and then press F9 (or hit Download button).
volcanoboxupdate.blogspot.com
The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue. volcanoboxupdate.blogspot.com
The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear. volcanoboxupdate.blogspot.com
Please note that, even though it isn't mandatory to select it on the list of images to flash,
preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode.
USB data cable
MediaTek USB VCOM drivers
SP Flash Tool ( Latest version MTK Flash Tool v. 5.1343.01 (18.10.2013))
volcanoboxupdate.blogspot.com
First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
volcanoboxupdate.blogspot.com
Flashing the whole ROM
First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
(MT6575_Android_scatter_emmc.txt or MT6577_Android_scatter_emmc.txt, depending on which phone you have) for your device and ignore any message that may appear.
volcanoboxupdate.blogspot.com
Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear.
volcanoboxupdate.blogspot.com
After the red progress bar is complete, there will appear a purple progress bar.
volcanoboxupdate.blogspot.com
Right after the purple progress bar is complete, a message will appear underneath it:
“Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
When the yellow bar is complete, you'll get a popup with a green circle and Download OK message,
which means that the process has been successfully terminated.
volcanoboxupdate.blogspot.com
You can now safely disconnect your phone and turn it on. The process ends here.
Flashing only part of the ROM
In case you want to flash just one part of the ROM, that is also possible. In the shown example, only recovery image will be flashed.
Deselect all parts except the one(s) you want to flash and then press F9 (or hit Download button).
volcanoboxupdate.blogspot.com
The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue. volcanoboxupdate.blogspot.com
The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear. volcanoboxupdate.blogspot.com
Please note that, even though it isn't mandatory to select it on the list of images to flash,
preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode.
volcanoboxupdate.blogspot.com
This is dummy text. It is not meant to be read. Accordingly, it is difficult to figure out when to end it. But then, this is dummy text. It is not meant to be read. Period.
ConversionConversion EmoticonEmoticon